technical data
VEHICLE TYPE:Vinyl Co-Polymer Emulsion
CLASSIFICATION:Architectural Exterior Coating
FINISH:Low sheen (satin-like)
GLOSS:8-10 O.N.
SOLIDS (by weight):68.2%
VOLATILE ORGANIC COMPOUNDS:
V.O.C.*
Vinyl ProPrime  64 G/L
Liquid Vinyl Siding  98 G/L
PVC CONTENT:31.34%
VISCOSITY:105-115 KU
P/B RATIO:1.310
PH:8.5 - 9.0
GRIND:4+
SPECIFIC GRAVITY1.2818

* Complies with California Air Resource Board (CARB) Requirements and is V.O.C. COMPLIANT IN ALL REGULATED AREAS of U.S.A.


SPECIFICATIONTESTRESULT
PERMEABILITYASTM D-165315.3 perms
(Highly Breatheable)
WATER VAPOR TRANSMISSIONASTM E-962.12 grains /hr /ft
ELONGATION at BREAK POINTASTM D-412603%
TENSILE STRENGTH @ 23C 55% R.H.ASTM D-412142 psi
COLD TEMPERATURE FLEXIBILITYASTM D-711Passes
FUNGUS and MILDEW RESISTANCEASTM D-3274Total absence of growth
ADHESIONPassesASTM D-1308
ACCELERATED WEATHERING 6,000 hrsASTM G-26No chalking or discoloration
WIND DRIVEN RAIN (98 mph)63 US gal/hr flow rate
Federal specification TTC 555B
Passes in triplicate
SHORE A HARDNESSASTM D-224088
FLAME SPREADASTM E-845
SMOKE DENSITYASTM E-845

EQUIPMENT RECOMMENDATION:
AIRLESS SPRAYER:
min. specifications
Pressure: 3,000 psi
Flow rate: 1.2 GPM minimum
Support Tip Sizes 521 and larger
MOISTURE METER:must register below 10%
RECOMMENDED TIP SIZE:521 to 525

DOWNLOADS:
PRODUCT SHEET:  description (pdf)
APPLICATION GUIDELINES:  guidelines (pdf)
SAFETY DATA SHEET:SDS available upon request